Technical parameters
| ITEM | Unit | CK6163 |
| NC system | KND2000 / GSK 980TDI (Optional ) | |
| Max. turning diameter of bed | mm | 630 |
| Max. rotation diameter of tool holder | mm | 320 |
| Width of bed guide rail | mm | 550 (split-type) |
| X/Z direction fast moving speed | mm/min | 6000 / 8000 |
| Min. feed increment in X/Z direction | mm | 0.001/0.001 |
| Max. workpiece length | mm | 1000 / 1500 / 2000 / 3000 / 4000 / 5000 |
| Max. turning length | mm | 850 / 1350 / 2850 / 3850 / 4850 |
| Spindle end code | A2-11 | |
| Chuck (manual) | Φ400 (Three-jaw) / Φ630 (/Single-acting three-jaw) | |
| Diameter of main shaft through hole | mm | 105 (Optional 130) |
| Spindle front end conical hole | 1:20 / 120 | |
| Spindle speed series | Manual fourth gear (Optional hydraulic fourth gear) | |
| Diameter of tailstock sleeve | mm | 100 |
| Max. stroke of tailstock sleeve | mm | 250 (Standard configuration) |
| Tailstock sleeve taper hole | Mohs No.6 | |
| Spindle speed | rpm/min | 30-80 / 53-150 / 125-350 / 300-835 |
| Tool holder form | Vertical four-station or six-station | |
| Main motor power | KW | 15 (Frequency conversion) |
| Weight (processing length 1500mm) | KG | 4200 |
| Size (L × W × H) | mm | 3800×2200×2200 |
| Standard configuration |
| Bed foot |
| Automatic lubrication system |
| Variable frequency speed control spindle system |
| Cooling system |
| 15KW main motor and frequency converter |
| Manual tailstock |
| Four-station electric tool holder |
| Electrical control system |
| Three-jaw chuck |
| CNC system (GSK) |
| Servo feed transmission system |
| Semi-closed protective cover |
| Optional configuration |
| 6-station electric tool holder |
| Center frame and tool holder |
| CNC system (GSK, FANUC, SIEMENS, etc.) |
| Three-jaw chuck (hydraulic/pneumatic) |
Navigation
Contact Us
Address：West of Nanzhang Village, Xingjiawan Town, Renze District, Xingtai City, Hebei Province
Phone：15127969619
Contacts：Manager zhang
Mobile Access
